Happymodel Crux3 ELRS 1S – 115mm Wheelbase, 3-Inch F4 Toothpick FPV Racing Drone with 5.8G VTX & Caddx ANT 1200TVL Camera – Ideal for Fast-Paced Drone Races and Enhanced Video Quality

Be the first to review this product.

$86.96

Free shipping within 3 days

Easy returns within 30 days

Shopping information security

Only 20 left, hurry up.

Receiver

Shipping is not available in United States (US).

Description
Reviews (0)

Introducing the Happymodel Crux3 1S ELRS Toothpick Drone

The Happymodel Crux3 1S ELRS is a cutting-edge toothpick FPV racing drone that offers superior performance in a small and lightweight package. Featuring the latest technology in flight control, brushless motors, and camera, this drone is perfect for both beginners and expert racers. The Crux3 is compatible with the CaddxFPV Peanut and Insta360 GO2 cameras, and delivers an impressive 4.5 minutes of flight time when using a 1S 650mAh battery. Experience the thrill of flying with the Happymodel Crux3 1S ELRS today!

Key Features and Specifications

40g 1S brushless toothpick drone for agile and responsive flight performance.
AIO flight controller with ELRS receiver and 5.8G VTX for seamless integration.
CADDX ANT 1200TVL camera for crystal clear aerial footage.
New 1202.5 KV11500 brushless motor for increased power and efficiency.
Compatible with CaddxFPV Peanut and Insta360 GO2 for versatile camera options (cameras not included).
Impressive flight time of 4.5 minutes with a 1S 650mAh battery (not included).

Specifications

Brand Name: Happymodel
Model: Crux3 1S ELRS
Item Name: 115mm F4 1S Toothpick FPV Racing Drone BNF
Wheelbase: 115mm
Size: 97mmx97mmx35mm (without propellers)
Weight: 40g (without battery)
Motor: EX1202.5 KV11500
Propellers: Gemfan 75mm
Flight Controller: STM32F411CEU6 with MPU6000 / ICM20689 or BMI270
Onboard 4in1 ESC: EFM8BB21 1S 5A
Onboard SPI ExpressLRS 2.4GHz Receiver
Onboard 5.8G VTX: 25mW~200mW, 40CH with Race band and Smartaudio
Caddx ANT 1200TVL Camera: 1/3″ CMOS Sensor, Global WDR, 3D DNR
Recommended Lipo Battery: 1S 450mAh / 650mAh / 660mAh / 720mAh PH2.0 Plug (not included)

Package Contents:

1x Crux3 Frame and canopy
1x ELRS F4 2G4 flight controller with built-in SPI ExpressLRS 2.4G receiver
4x Happymodel EX1202.5 KV11500 brushless motors
1x Gemfan 75mm bi-blade propellers (4cw+4ccw)
1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV camera
1x 5.8G 25mW~200mW 40ch VTX (Flight controller built-in)
1x Screwdriver
1x Propeller disassemble tool
3D Printed canopy for Insta360 GO2 and CaddxFPV Peanut
1x Happymodel Handbag (for convenient storage and transportation)

Product Specifications

Motor	Mode: EX1202.5 KV11500 Configu-ration:9N12P Stator Diamter:12mm Stator Length:2.5mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.Len):Φ14mm14.5mm Weight(g):4.4g No.of Cells(Lipo):1S
Propellers	Gemfan 75mm Center Thickness:5mm Prop Diameter:75mm Center Hole diameter:1.5mm Pitch:0.9in
Flight controller	MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 / ICM20689 or BMI270 (SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI ExpressLRS 2.4GHz receiver Built-in 5V 1A BECFlight controller firmware target: CRAZYBEEF4SX1280
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT300
Onboard SPI ExpressLRS 2.4GHz Receiver	Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol to flight controller: CRSF Could bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest
Onboard 5.8g VTX	Output power: 25mw~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready
Caddx ANT 1200tvl camera	Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: [email protected] Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 1414mm(with bracket to 1919mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.)