Happymodel Mobula6 ELRS – 1S 65mm F4 AIO 5A ESC Racing Drone with 5.8G VTX & ELRS Receiver – Brushless Whoop FPV, 0702 26000KV Motor, RunCam Nano 3 Camera
$75.89
Free shipping within 3 days
Easy returns within 30 days
Shopping information security
Only 25 left, hurry up.
Shipping is not available in United States (US).
Introducing Mobula6 ELRS: The Ultimate Tiny Whoop Drone
Meet the Mobula6 ELRS 1S 65mm Brushless Whoop Drone, the perfect solution for all your Tiny Whoop flying needs. With its cutting-edge ELRS RC link system, ultra-light brushless motors, and high-quality components, this incredibly lightweight drone offers unparalleled performance and reliability. Get ready to experience smooth, powerful flights packed with excitement and fun!
Key Features:
- All-in-one flight controller with ELRS receiver and 5.8G VTX
- Super lightweight 1S 65mm Brushless Whoop at only 18.7 grams
- Equipped with the world’s lightest brushless motors – SE0702 at just 1.46 grams each
- Features Runcam Nano3, the lightest 1/3 CMOS 800TVL Camera
- Smooth and powerful performance with 1S Lipo/LIHV compatibility
Specifications:
Brand: Happymodel
Item Name: Mobula6 ELRS 1S 65mm Brushless Whoop Drone BNF Version
Wheelbase: 65mm
Size: 80mm x 80mm x 37mm
Weight: 18.7g
Voltage: 1S
| Version | 2.4GHz ELRS | 915MHz ELRS | 868MHz ELRS |
|---|---|---|---|
| Color | Green | Blue | Blue |
| Flight controller | ELRS F4 2G4 | CrazyF4 ELRS | CrazyF4 ELRS |
| Firmware target | CRAZYBEEF4SX1280 | CRAZYBEEF4DX | CRAZYBEEF4DX |
Additional details for specific components can be found in the original product text above.
Package Contents:
- 1x Mobula6 1S 65mm Whoop Drone Frame
- 4x SE0702 KV26000 Brushless Motors
- 1x Set of HQPROP 31mm Bi-blade Propellers (4cw+4ccw)
- 1x Runcam Nano3 1/3 CMOS 800TVL Camera
- 1x Onboard 5.8G 25mw-200mw VTX
- 4x 1S 300mah 30C LiHV Battery
- 1x 1S Lipo/LIHV USB Charger
- 1x Propeller Disassemble Tool
- 1x ELRS F4 2G4 Flight Controller Built-in Receiver (Optional)
Invest in the Mobula6 ELRS drone and experience unrivaled performance in a lightweight package – perfect for your next Tiny Whoop adventure.
Product Specifications
| Version | 2.4GHz ELRS | 915MHz ELRS | 868MHz ELRS |
| Color | Green | Blue | Blue |
| Flight controller | ELRS F4 2G4 | CrazyF4 ELRS | CrazyF4 ELRS |
| Firmware target | CRAZYBEEF4SX1280 | CRAZYBEEF4DX | CRAZYBEEF4DX |
| Built-in ExpressLRS receiver | SPI 2.4GHz | Serial-base 915MHz | Serial-base 868MHz |
| Built-in Dshot ESC | 5A | 5A | 5A |
| Receiver antenna plug | SMD ceramic antenna | IPEX MHF3 | IPEX MHF3 |
| Onboard VTX power | 25mw~200mw | 25mw~200mw | 25mw~200mw |
| Brushless Motor | 0702 KV26000 | 0702 KV26000 | 0702 KV26000 |
| Propeller | HQPROP 31mm Bi-blade | HQPROP 31mm Bi-blade | HQPROP 31mm Bi-blade |
| Battery | 1s 300mah Lipo battery | 1s 300mah Lipo battery | 1s 300mah Lipo battery |
| Motor | Mode: SE0702 KV26000 Configu-ration:9N12P Stator Diamter:7mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ9.5mm*14mm Weight(g):1.46g No.of Cells(Lipo):1S only |
| Propellers | HQprop31mmx2 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm Weight:0.2g |
| Flight controller | ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000 or ICM20689 or BMI270.(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in ExpressLRS 2.4G/915MHz/868MHz receiver Built-in 5V 1A BEC Built-in voltage detection |
| Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600 |
| Onboard SPI ExpressLRS 2.4GHz Receiver (Optional) | Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHzAntenna : SMD antenna Telemetry output Power: <12dBmReceiver protocol: SPI ExpressLRS Could bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module ExpressLRS version 1.0.0 or 1.0.1 both compatible |
| Onboard Serial-based ELRS Receiver ( Optional) | Operation current: ~100Ma Rx To FC protocol: CSRF RF Frequency optional: 915mhz or 868mhz(EU) Antenna connector: IPEX4 Telemetry output Power: <17dBmFirmware target: Happymodel_RX_ES915RXReceiver protocol: CRSF Could bind with Happymodel ES915TX , Frsky R9M and DIY ELRS TX module(need to flash the same version ELRS firmware) Firmware flash via Betaflight pass-through |
| Onboard 5.8g VTX | Output power: 25mw~200mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race bandSmartaudio ready |
| Runcam Nano3 | Model: RunCam Nano 3 Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V [email protected] Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
| Lipo Battery | Capacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm Weight: 8gConnector: PH2.0 |
Product Images
Reviews
There are no reviews yet.