Happymodel Mobula7 1S HD – 75mm Micro Whoop FPV Racing Drone with ELRS BNF, 0802 20000KV Motor & RunCam Split3-Lite 1080P Camera DVR – Perfect for Drone Racing Enthusiasts
$96.59
Free shipping within 3 days
Easy returns within 30 days
Shopping information security
Introducing the Mobula7 1S HD 75mm Whoop Drone
The Mobula7 1S HD version is a lightweight and efficient 75mm brushless whoop that provides 1080P high-definition video recording capabilities. Featuring a highly integrated All-In-One (AIO) flight controller supporting ESC with a maximum current output of 12A, this drone is a top choice for capturing stunning aerial footage. With added blackbox support for gyroflow stabilization, enjoy safe and smooth flights while recording high-quality videos.
Notable Features
- X12 5-IN-1 AIO flight controller
- VTX Power up to 400mw ELRS V2.0 Support
- NEW RS0802 KV20000 motors
- 1080P HD Video record
- Blackbox Ready support GYROFLOW
- Smooth and powerful performance
- Compatible for 1S Lipo/LIHV
- Recommended 1S 450mah/550mah/650mah batteries (Not included)
Specifications
- Brand Name: Happymodel
- Item Name: Mobula7 1S HD 75mm Micro FPV whoop drone
- Wheelbase: 75mm
- Size: 99mm*99mm*45.5mm
- Weight: 33g
- Receiver option: SPI 2.4GHz ELRS V2.0 / SPI Frsky D8/D16
Motor Specifications
- Mode: RS0802 KV20000
- Configuration: 9N12P
- Stator Diameter: 8mm
- Stator Length: 2mm
- Shaft Diameter: Φ1.5mm
- Motor Dimension(Dia.*Len): Φ10.5mm*13.5mm
- Weight: 2.0g
- No. of Cells (Lipo): 1S only
Propeller Specifications
- Weight: 0.24g
- Material: PC
- Pitch: 1 inch
- Props Diameter: 40mm
- Center Thickness: 5mm
- Center Hole Diameter: 1.5mm
[The rest of the specifications]
Package Contents
- 1x Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame)
- 1x Flight Controller AIO ESC Receiver vtx
- 4x RS0802 KV20000 brushless motor
- 2x Gemfan 1610-2 bi-blade propellers CW
- 2x Gemfan 1610-2 bi-blade propellers CCW
- 1x Runcam Split3-Lite Camera
- 1x External Blackbox Module supporting gyroflow
- 1x Propeller disassembly tool
- 1x 1S series balance charging board
Product Specifications
| Motor | Mode: RS0802 KV20000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm Weight(g):2.0g No.of Cells(Lipo):1S only |
| Propeller | Weight:0.24g Material:PC Pitch:1 inch Props Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm |
| Flight Controller | X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM20689(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16 Built-in voltage detection Built-in current sensor |
| Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware When use Blujay firmware with 48khz, should set startup power to 1100/1200 |
| Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz Compatible with ExpressLRS V2.0 TX Module |
| Onboard Frsky SPI D8/D16 receiver Version | Packet Rate option: 50Hz/150Hz/250Hz/500Hz Compatible with ExpressLRS V2.0 TX Module |
| Onboard 5.8g OPENVTX | Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) |
| Runcam Split3-Lite | Model: RunCam Split3-Lite |
External Blackbox | Size:18*15.5*4.5 With Built-in Voltage booster module Weight:1.5gram SD Card support max to 32GB SD Card need to use FAT32 Format Notes: Need to careful to insert the TF SD Card , and don’t pull it out while install the battery. |
Product Images
Reviews
There are no reviews yet.