Happymodel Bassline 2S 90mm – 2 Inch Micro Toothpick FPV Racing Drone BNF, CADDX ANT 1200TVL Camera – Ideal for Beginners and Drone Racing Enthusiasts

Be the first to review this product.

$86.96

Free shipping within 3 days

Easy returns within 30 days

Shopping information security

Only 25 left, hurry up.

Receiver

Shipping is not available in United States (US).

Description
Reviews (0)

Discover the Bassline Toothpick Drone

Introducing the uniquely designed Bassline Toothpick Drone, inspired by team pilot Nathan Loopz. With its roots going back to 2019, this 2inch Micro FPV toothpick drone boasts outstanding performance in the micro freestyle category. Equipped with a powerful X12 5-IN-1 AIO flight controller, the Bassline ensures an extraordinary flying experience like no other.

Noteworthy Features

With an inbuilt 2.4G ELRS V2.0 and OPENVTX VTX Power up to 400mw, the Bassline provides stable and secure flight performance. The drone also supports ELRS V3.0 with a firmware upgrade. The powerful EX1103 KV11000 motors and CaddxFPV Ant FPV camera guarantee a sharp flying session. For optimal performance, we recommend using 2S batteries with a width of roughly 17mm and a height of about 13mm (not included).

Elevating Specifications

The Bassline Toothpick Drone boasts a lightweight design with a wheelbase of 90mm and a size of 115mm*115mm*40mm. The optional receiver versions include 2.4G ELRS SPI, SPI Frsky D8/D16, SPI Flysky, and PNP (without an onboard receiver). Among the spare parts specifications, you can find detailed information on the motor, propellers, flight controller, onboard 4in1 ESC, onboard SPI ExpressLRS 2.4GHz, onboard SPI Frsky D8/D16, onboard SPI Flysky receiver version, PNP version (without onboard receiver), onboard 5.8g OPENVTX, and the Caddx ANT 1200tvl camera.

What’s Included

When you purchase the Bassline Toothpick Drone, the package includes the Bassline 2inch frame and canopy, X12 ELRS V2.1 flight controller with built-in SPI ELRS 2.4G receiver (optional versions available), EX1103 KV11000 brushless motors, Gemfan toothpick 2023 tri-blade propellers (4cw+4ccw), Caddx ANT 1200TVL Camera, onboard 5.8G Openvtx 0mw~400mw VTX, and a canopy for a 14mmx14mm camera.

Get ready to experience unparalleled flight performance with the Bassline Toothpick Drone!

Product Specifications

Motor	Mode: EX1103 KV11000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.Len):Φ13.5mm15.5mm Weight(g):3.8g No.of Cells(Lipo):1-2S
Propellers	Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mm
Flight controller	X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM20689 or ICM42688P(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A Built-in voltage detection Built-in current sensor
Onboard 4in1 ESC	Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Default Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver	Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware Could flash FC firmware to support ExpressLRS v3.0 TX module
Onboard SPI Frsky D8/D16 receiver Version	SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8/D16 model Channels: 8ch/16ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support
Onboard SPI Flysky receiver Version	SPI BUS receiver Protocol: AFHDS-2A Channels: 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support
PNP Version (without onboard receiver)	Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input
Onboard 5.8g OPENVTX	Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw)
Caddx ANT 1200tvl camera	Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: [email protected] Auto Gain Control: YES WDR: Global WDR DNR: 3D DNR Dimensions: 1414mm(with bracket to 1919mm) Wide Power Input: DC 3.7-18V Weight: 2g (N.W.)

Item Name	Qty
Bassline 2inch frame and canopy	1
Option1: X12 ELRS V2.1 flight controller built-in SPI ELRS 2.4G receiver	1
Option2: X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver
Option3: X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver
Option4: X12 PNP V1.1 flight controller without onboard receiver
EX1103 KV11000 brushless motor	4
Gemfan toothpick 2023 tri-blade propellers(4cw+4ccw)	1
Caddx ANT 1200TVL Camera	1
Onboard 5.8G Openvtx 0mw~400mw VTX	1
Canopy for 14mmx14mm camera	1